There may be instances when all possible solutions to fix your network internet problems may TCP/IP stack may help in this case.
Microsoft has released a new tool to do this for you or you can manually reset TCP/IP.
May 172010
Oct 222009
If you experience Slow Network Connection or file copy from and to the Windows 7 PC or laptop takes ages to completes or connection disconnects then this could be caused by the Task Offload settings. The task offload settings are enabled by default at the NIC level and globally at the system level. This should work for Windows Vista as well.
Incoming search terms:
- netsh int ip set global taskoffload=disabled (232)
- windows 7 slow network (93)
- netsh int ip set global taskoffload (55)
- netsh taskoffload (35)
- netsh int ip set global taskoffload=disable (30)
- windows 7 network file copy slow (30)
- tcp checksum offload windows 7 (29)
- ip checksum offload windows 7 (28)
- windows 7 task offload (27)
- checksum offload windows 7 (21)
Jan 212009
Starting Windows Vista, Windows Server 2008 and Windows 7, to prevent address scans of IPv6 addresses based on the known company IDs of network adapter manufacturers, Windows by default generate random interface IDs for non-temporary autoconfigured IPv6 addresses, including public and link-local addresses. A public IPv6 address is a global address that is registered in DNS and is typically used by server applications for incoming connections, such as a Web server.
Continue reading »
Incoming search terms:
- netsh exe interface ipv6 set global randomizeidentifiers=disabled (165)
- randomizeidentifiers=disabled (105)
- netsh interface ipv6 set global randomizeidentifiers=disabled (78)
- randomizeidentifiers (69)
- netsh randomizeidentifiers (23)
- netsh interface ipv6 set global randomizeidentifiers (20)
- set global randomizeidentifiers=disabled (18)
- global randomizeidentifiers (17)
- ipv6 randomizeidentifiers (12)
- set global randomizeidentifiers (10)
Jul 142008
In Windows Server 2008, we can setup the DHCP Server role and configure DHCP paramters including Scope, IP Range etc and the startup type all from command line. This is especially useful, if you are using Windows Server Core installation.
Incoming search terms:
- server core dhcp (26)
- server core dhcp configuration (19)
- dhcp server core (18)
- sc config dhcp server start= auto (18)
- windows server 2008 core dhcp (18)
- how to setup a dhcp server in server core 2008 (15)
- install dhcp command line (14)
- server 2008 core dhcp (13)
- the command line syntax to install dhcp on windows server 2008 server core is (13)
- sc config dhcpserver start= auto (12)
Jul 132008
In Windows Server 2008 Core installation, the only way to setup IP Address eithe Static or DHCP is from the command line. The following procedure helps setting the IP Address from the command Line using “netsh”. This procedure works in Windows Server 2008 (No core installation as well), Windows Server 2003, Windows XP, Windows Vista.
Incoming search terms:
- netsh interface ipv4 set address (301)
- netsh interface ipv4 set address name (81)
- netsh the interface is unknown (80)
- netsh set ip address windows 7 (68)
- set ip address command line (67)
- netsh interface ipv4 (65)
- netsh interface ipv4 set (45)
- netsh windows 7 set ip address (40)
- netsh int ipv4 set address (28)
- set static ip command line (28)